You can adjust the machine's settings using the control knobs or via the xBloom App based on your preferences:
|
Measurement
|
Unit
|
|
Temperature
|
°C / °F
|
|
Weight
|
g / ml / oz
|
|
Water Intake
|
Tank / Tap (Water Line)
|
4.1 Changing Settings through Machine
- Press and hold the right-side knob for 3 seconds on the machine's main interface to enter settings mode.
- Left/Right-side Knob: Press to toggle options.
- Middle Knob: Rotate to toggle unit options.
4.1.1 Change Temperature Unit
- Middle Knob: Rotate to switch temperature unit preferences (Celsius °C / Fahrenheit °F).
- Right Knob: Press to go to the weighing interface.
4.1.2 Change Weight Unit
- Left Knob: Press to return to the previous measurement unit.
- Middle Knob: Rotate to change weighing unit (grams g, milliliters ml, ounces oz).
- Right Knob: Press to go to the water intake interface.
4.1.3 Change Water Intake Unit
- Left Knob: Press to return to the previous measurement unit.
- Middle Knob: Rotate to adjust the water intake method (tank or tap).
- Right Knob: Press to confirm ✓ and exit settings mode.
4.1.4 Advance Features
4.1.4.1 Restart
Quickly press the right-side knob three times on any screen to cancel the current task and restart the machine. This does not reset settings but will disconnect Bluetooth.
🔍 Please Note: The restart function is unavailable during the grinder calibration.
4.1.4.2 View Firmware Version
Press and hold the middle knob on the main interface for 3 seconds to display the current firmware version on the LED panel.
4.1.4.3 Grinder Calibration
Press the left knob on the machine's main display to access the grinder module. Quickly press the left knob three times to activate the grinder calibration feature. Refer to the grinder calibration section for details.
4.1.4.4 Descale
Press the middle knob on the machine's main display to access the brewer module. Quickly press the middle knob three times to start the descaling process. Refer to the descaling section for details.
4.1.4.5 Scale Calibration
4.1.4.6 Set pouring radius
You can adjust the pouring radius' maximum amplitude according to the dripper's radius.
1. Connect your machine with App
2. View the machine detail page
3. Click on Advance Features
4. Click on Set pouring radius
5. Adjust the pouring radius according to the size of your dripper.
⚠️ Warning: Adjusting the pouring radius too wide may cause hot water to spill from the dripper. Be careful to avoid burns.
🔍 Please Note: It is recommended to use the default setting as-is. Do not adjust unless necessary.
4.1.4.7 Switch to Auto mode/Pro Mode
Quickly press the middle knob three times on the main interface of the machine.